Datasheet: Model 807-0134 SKU 02082 Part Number 3511044 | NETSCOUT

Datasheet: Model 807-0134 SKU 02082 Part Number 3511044

<i>SELECT IN-LINE V.35 PROBE ASE - IP TRANSPORT (SHIELDED) with LinkSafe Capabilities</i>
Key Features:
  • Supports TruView™ and Visual Performance Manager™
  • Supports IP Transport and OmniPoint software
  • Capable of Inline placement with MSP certified fail to wire
  • Last mile keep alive upon CPE Router failure provides 100% availability and fault isolatio
  • Configurable to support IPV4 or IPV6 management and monitoring
  • Inband and LAN management capable
  • Pro-active real time SNMP events with event forwarding
  • Continuous 1 second monitoring with burst analysis
  • Layer1 through 7 auto-detection and analysis
  • Server and application response time baselines and alarms
  • 30 Concurrent VoIP calls with MoS scores
  • 155 site to site SLA metrics per CoS
  • Rogue application discovery
  • On demand remote packet capture when required

The TruView and Visual Performance Manager V.35 LinkSafe™ inline probe ASE is deployed inline on a T1 or E1 access line, typically between a CSU/DSU and customer premises equipment. It supports IP Transport and OmniPoint software for deployment in frame relay or HDLC-based networks that use IP switching.

The V.35 inline probe ASE supports V.35 connectivity through a V.35 Data Terminal Equipment (DTE) interface on the network side and Data Communications Equipment (DCE) interface on the user side.

The ASE operates at data rates up to 2.048 Mbps, deriving timing from the network-side and sourcing timing on the user side. It also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure notification.

Inline Probe v35 front

V.35 inline probe ASE front view

Inline Probe v35 rear

V.35 inline probe ASE rear view

V.35 ASE Inline

V.35 inline probe ASE position on network

Model 134 v.35 Inline Probe ASE Specifications SKU 02082 Part Number 3511044
General Dimensions 9.75" (24.7 cm) x 8.9" (22.6 cm) x 1.75"(4.4 cm) Metal case with internal power supply
Weight 2.30 lbs.
Data Rate 0 to 2.048 Mbps synchronous
Timing Mode RD: Synchronous with SCR SD: Synchronous with SCT or SCTE
Environment Operating Temperature 0° to +40°C (+32° to +104° F)
Storage Temperature -20° to +55°C (-4° to +131°×F)
Clearance Requirement Minimum of 3" (7.62 cm) space on sides
Operating and Storage Humidity 10% to 80%, noncondensing
Power Requirements Input 100 to 240 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
V.35 User Interface (DCE) Configuration DCE for interfacing with DTE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Connector Female 34-pin V.35 connector
Signaling RTS, DTR
V.35 Network Interface (DTE) Configuration DTE for interfacing with DCE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Connector Female 34-pin V.35 connector
Signaling CTS, RLSD, DSR
Serial Port Interface Baud Rate Selectable up to 19200 bps
Parity 8 data bits, no parity
Stop Bit 1 stop bit
Electrical Format EIA RS-232, DTE
Connector RJ-45
Ethernet 10/100BaseT Interface Bit Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48

What are ASEs?

ASEs (Analysis Service Elements) are data collection and network performance monitoring hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the TruView and Visual Performance Manager systems. ASEs offer in-depth, real-time, and historical visibility into the performance of an applications infrastructure. Data gathered by ASEs is stored in the VPM server and displayed and analyzed from the Web portal interface. As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.

What is TruView and Visual Performance Manager?

TruView and Visual Performance Manager are flexible solutions that can scale to help the largest enterprises, carriers and managed service providers decrease the cost of performance management, increase revenue, and optimize utilization of existing assets. This is accomplished by enabling IT organizations to become a source of competitive advantage, not a cost center, by providing actionable visibility into a centralized integration point for managing applications, VoIP network and server performance across a complete network.

Hardware Support

Enhanced ASE hardware warranty service programs are available to help you maximize your investment in TruView and Visual Performance Manager. For more detailed warranty information, visit

Software Maintenanced

Each hardware ASE is managed remotely by the TruView or Visual Performance Manager. Maintenance is dependent on the software module purchased. For more detailed maintenance information, visit Inside Sales at the number below.

Professional Services

Professional services are available for installing, maintaining and customizing your solution your ASE hardware and TruView and Visual Performance Manager solution. Replacing the hardware on site with or without a technician is offered worldwide. For more detailed professional services information, visit

Ordering information

For more details, please contact NETSCOUT at 1-844-833-3713 (US), 1-978-320-2150 (Outside of US) or go to