UpTime ASE Model 807-0112 (SKU 01805) T1 CSU/DSU with Modem
UpTime Analysis Service Element (ASE) is a flexible inline hardware probe. Designed to monitor wireline data with fail to wire capabilities, the sensor provides Physical Layer (Layer 1) to Application Layer 7, real time analytics, as well as operate as an external CSU DSU.
The ASE is a single, powerful suite of tools that provide end-to-end visibility (SLA) into your network and applications via a unified platform for real-time monitoring, troubleshooting and analyzing applications, including VoIP, to help you make informed decisions about the performance of your Wide Area Network as well as applications that run across the WAN. More information on the real-time visibility can be found at http://www.netscout.com/uptime.
- Multi-tenant management system
- Inline deployment
- 60 concurrent VoIP calls with MoS scores
- Inband and LAN management
- IPv4 and IPv6 monitoring and management
- Last mile keep alive upon CPE Router failure provides 100% availability and fault isolation
- Pro-active SNMP support
- 155 site to site SLA measurements
- On-demand packet capture
- Support for 100 custom applications
- Continuous 1 second monitoring with burst analysis
- Supports last cry, remote site power outage notifications
This combined remote office monitoring view of time-synchronized local traffic across the WAN is the ideal solutions for triaging the network local exchange, the wide area network, the class of service (CoS) configuration, VoIP analysis and application and server response times.
VoIP MoS scores
On-Demand Packet Capture
Real Time Bandwidth and Burst
The UpTime remote probes (virtual or hardware) are managed with a central, multi-tenant scalable system, spanning the entire delivery infrastructure for complex, multi-site, enterprise MPLS architectures. Visual UpTime can be used as a self -managed solution by private enterprises with a distributed network environment and multiple data centers; as well as a Managed Service, offered by many of the top global service providers, including AT&T, Verizon, Sprint, CenturyLink, Level 3, and XO Communications. Managed Service providers host the UpTime server in their cloud while managing, maintaining, and providing a collaborative view into the solution for the enterprise. Other managed options include enterprise hosting within their private data center and the service provider managing the system.
Real-Time Network, Application, VoIP Visibility
UpTime ASE wireline sensors (probes) provides a real-time view into a remote site, allowing for immediate change-configuration validation, accuracy in bandwidth analysis, auto-discovery of applications, and VoIP MoS scores. This allows network administrators quicker mean time to identify the culprit and claim, “it’s not the network!”
Network Burst Analysis and Capacity Planning
With continuous 1 second monitoring, the network administrator can identify the time the network is bursting at 90% or greater for an extended time and identify the application flow causing the congestion on the network. The network administrator will be able to say “it’s this application using this IP address talking to this server on this VLAN with this CoS tag that is causing the congestion on the network. It's not the network!”
Individual and Site VoIP Monitoring
Analyzing customer VoIP traffic, the ASE provides remote site based MoS analysis and individual call details to validate the settings and identify errors on the network or within the UCS solution. All time correlated, so that the network administrator can say, “It’s not the network!”
On-Demand Remote Packet Capture
Being inline, on the wire, allows on-demand, targeted packet capture, based upon the already identified issue. By using basic or complex filters, and even specific traffic triggers, the IT team can quickly identify an issue on the network and show the appropriate support staff the issue. Packets can be saved or exported into third party tools to be shared with others. This real time, remote site, packet level visibility will shrink the mean time to identify the application and server issues via the network tool set.
Site to Site Network SLA (Service Level Agreements)
The ASE inline probe provides customer SLAs on up to 8 CoS tagged traffic. Utilizing a combination of actual customer and synthetic traffic, the ASE to ASE SLAs includes round-trip delay (RTD), availability, packet delivery ratio (PDR) and jitter. This allows the network team a complete picture of how effective the network is running for each application assigned to a CoS.
- Inline fail to wire will keep the circuit alive even if there is no power to the unit.
- Provides NetFlow exporting as an additional data source to any 3rd party collector.
- Real time, pro-active performance threshold events and forwarding.
- Power outage notification when deployed inline in front of the WAN router.
- BGP Keep alive should the Customer Premise Router (CPE) lose power or fail, insuring 100% availability of the local loop.
- VLAN and CoS monitoring and validation of correct application assignments.
The external T1 CSU/DSU ASE with modem (Model 807-0112) is deployed on a T1 access line at the demarcation point between the provider network and the customer premise. It supports full and fractional (FT1) T1 networks and provides connectivity through the v.35 and additional cross connect signal (DSX-1) interfaces.
The ASE’s drop-and-insert feature provides secondary DSX-1 interface that can connect to a private branch exchange at a customer’s site. The T1 timeslots can be segmented for a PBX on the same circuit carrying data traffic. The ASE’s internal modem lets users establish a telephone connection to either the ASE’s administrative interface or a pass-through connection via the serial port.
Option 1: T1 CSU/DSU deployed in front of the customer edge router.
Model 807-0112: T1 CSU/DSU ASE Specifications (SKU 01812)
|Dimensions||8.16" (20.7 cm) x 9.0" (22.8 cm) x 1.62"(4.1 cm) Plastic case with internal power supply|
|Data Rate||1.544 Mbps synchronous|
|Timing Mode||Derived externally from the T1 network or DSX-1 interface, or internally from the ASE|
|Operating Temperature||0o to +40oC (+32o to +104o F)|
|Storage Temperature||-20o to +55oC (-4o to +131o×F)|
|Clearance Requirement||Minimum of 3" (7.62 cm) space on sides|
|Operating/Storage Humidity||10% to 90%, noncondensing|
|Input||100 to 120 VAC|
|Input Current Rating||0.5 amps|
T1 Network Interface
|Line Rate||1.544 Mbps ±50 bps synchronous|
|Line Format||AMI or B9ZS line coding|
|Framing||ESF or D4 framing formats|
|ESF FDL||ANSI T1.403, AT&T TR54016, both or none|
|Input Signal||0dB to -36dB|
|Output Signal||0, -7.5dB, -15dB, -22.5dB LBO|
|Pulse Density||AT&T 62411|
|Connector||8-pin modular jack—USOC: RJ48C|
|Timing||Loop, DSX-1, or internal|
|Channel Selection||1 to 24 channels in any combination|
Network DTE Interface (Data Port)
|Configuration||DCE for interfacing with DTE|
|Data and Clock Leads||ITU-T V.35|
|Signaling Leads||EIA RS-232 (ITU-T V.28)|
|Data Rates||56 kbps x N or 64 kbps x N (N = 1 through 24)|
|HDLC Inversion||Selectable V.35 data inversion|
|Transmit Timing Basis||Network selected-source timing|
|Receive Timing Basis||SCT, inverted SCT, SCTE|
|Receive Line Data Not Valid||RLSD, CTS|
|Connector||Female 34-pin V.35 connector|
|Line Rate||1.544 Mbps ±50 bps|
|Line Format||AMI or B8ZS|
|Framing||ESF or D4 (SF)|
|Input Signal||-1dB to -11dB|
|Line Equalization||0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft|
|Channel Selection||1 to 24 channels in any combination|
Serial Port Interface
|Specifications||19200 or 9600 bps baud rate, 8 data bits no parity, 1 stop bit, EIA RS-232 DTE electrical format, RJ-45|
Ethernet 10/100 BaseT Interface
|Bit Rate||10 or 100 Mbps|
|Connector||8-pin modular jack: RJ-48|
|Specifications||RJ11 connector, 14,400 bps max. connection speed, FCC Part 68 and IC-CS03 standards, compliance in US and Canada|
Each virtual and hardware ASE appliance supports network, application, and VoIP software modules. More information on the visibility provided can be found at, http://www.netscout.com/uptime.
Enhanced ASE hardware warranty service programs are available to help you maximize your investment in the ASE appliances with next business day replacement worldwide. For more detailed warranty information, visit http://www.netscout.com/support-and-service/overview.
Each hardware ASE is managed remotely by the multi-tenant TruView or Visual Performance Manager. Maintenance is dependent on the software module purchased. For more detailed information, visit Inside Sales at the number below, or call your sales representative.
Professional services are available for installing, maintaining and customizing your ASE hardware, TruView and Visual Performance Manager solution. Installation and configuration services on site with or without a technician is offered worldwide. For more detailed maintenance information, visit Inside Sales at the number below, or call your sales representative.
For more details, please contact NETSCOUT at 1-888-357-7667 or go to http://www.netscout.com/sales