Datasheet: T1 CSU/DSU ASE Model 807-0109 SKU 01802 Part Number 3510958 | NETSCOUT

Datasheet: T1 CSU/DSU ASE Model 807-0109 SKU 01802 Part Number 3510958

Key Features:

  • Supports TruView™ and Visual Performance Manager™
  • Supports IP Transport and OmniPoint software
  • Supports last cry, remote site power outtage notifications
  • Supports Ethernet proxy connection to Customer Edge Router
  • Last mile keep alive upon CPE Router failure provides 100% availability and fault isolation
  • Configurable to support IPV4 or IPV6 management and monitoring
  • Inband and LAN management capable
  • Pro-active real time SNMP events with event forwarding
  • Continuous 1 second monitoring with burst analysis
  • Layer1 through 7 auto-detection and analysis
  • Server and application response time baselines and alarms
  • 60 Concurrent VoIP calls with MoS scores
  • 155 site to site SLA metrics per CoS
  • Rogue application discovery
  • On demand remote packet capture when require

T1 CSU/DSU ASE with DSX-1

The TruView™ and Visual Performance Manager™ CSU/DSU ASE is deployed on a T1 access line at the demarcation point between the provider network and customer premises. It supports full and fractional (FT1) T1 networks and provides connectivity through V.35 and additional digital cross-connect signal (DSX-1) interfaces to provide real-time and historical statistics to TruView and Visual Performance Manager.

Supports IP Transport and OmniPoint software for deployment in networks that use IP switching.

The ASE's drop-and-insert feature provides a secondary DSX-1 port that can connect to a private branch exchange at a customer's site. T1 timeslots can be segmented for a PBX on the same circuit carrying data traffic. (See Figure.)

model 807-0112

T1 CSU/DSU model 807-0109 front view

T1 CSU/DSU model 807-0109 rear view


Position on the network

T1 CSU/DSU model 807-0112 position on network

 
T1 CSU/DSU ASE Specifications Model 807-0109 SKU 01802 Part Number 3510958
General Dimensions 8.16" (20.7 cm) x 9.0" (22.8 cm) x 1.62"(4.1 cm) Plastic case with internal power supply
Weight 2.10 lbs.
Data Rate 1.544 Mbps synchronous
Timing Mode Derived externally from the T1 network or DSX-1 interface, or internally from the ASE
Environment Operating Temperature 0o to +40oC (+32o to +104o F)
Storage Temperature -20o to +55oC (-4o to +131o×F)
Clearance Requirement Minimum of 3" (7.62 cm) space on sides
Operating/Storage Humidity 10% to 90%, noncondensing
Power Requirements Input 100 to 120 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
T1 Network Interface Line Rate 1.544 Mbps ±50 bps synchronous
Line Format AMI or B9ZS line coding
Framing ESF or D4 framing formats
ESF FDL ANSI T1.403, AT&T TR54016, both or none
Input Signal 0dB to -36dB
Output Signal 0, -7.5dB, -15dB, -22.5dB LBO
Pulse Density AT&T 62411
Connector 8-pin modular jack—USOC: RJ48C
Timing Loop, DSX-1, or internal
Channel Selection 1 to 24 channels in any combination
Network DTE Interface (Data Port) Configuration DCE for interfacing with DTE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Data Rates 56 kbps x N or 64 kbps x N (N = 1 through 24)
HDLC Inversion Selectable V.35 data inversion
Transmit Timing Basis Network selected-source timing
Receive Timing Basis SCT, inverted SCT, SCTE
Receive Line Data Not Valid RLSD, CTS
Connector Female 34-pin V.35 connector
DSX-1 Interface Line Rate 1.544 Mbps ±50 bps
Line Format AMI or B8ZS
Framing ESF or D4 (SF)
Input Signal -1dB to -11dB
Line Equalization 0 ft, 133 ft, 266 ft, 399 ft, 533 ft, 655 ft
Connector RJ-45
Channel Selection 1 to 24 channels in any combination
Serial Port Interface Specifications 19200 or 9600 bps baud rate, 8 data bits no parity, 1 stop bit, EIA RS-232 DTE electrical format, RJ-45
Ethernet 10/100BaseT Interface Bit Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48

What are ASEs?

ASEs (Analysis Service Elements) are data collection and network performance monitoring hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the TruView and Visual Performance Manager systems. ASEs offer in-depth, real-time, and historical visibility into the performance of an applications infrastructure. Data gathered by ASEs is stored in the VPM server and displayed and analyzed from the Web portal interface.

As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.

What is TruView and Visual Performance Manager?

TruView and Visual Performance Manager are flexible solutions that can scale to help the largest enterprises, carriers and managed service providers decrease the cost of performance management, increase revenue, and optimize utilization of existing assets. This is accomplished by enabling IT organizations to become a source of competitive advantage, not a cost center, by providing actionable visibility into a centralized integration point for managing applications, VoIP network and server performance across a complete network.

Hardware Support

Enhanced ASE hardware warranty service programs are available to help you maximize your investment in TruView and Visual Performance Manager. For more detailed warranty information, visit www.netscout.com.

Software Maintenance

Each hardware ASE is managed remotely by the TruView or Visual Performance Manager. Maintenance is dependent on the software module purchased. For more detailed maintenance information, visit Inside Sales at the number below.

Professional Services

Professional services are available for installing, maintaining and customizing your solution your ASE hardware and TruView and Visual Performance Manager solution. Replacing the hardware on site with or without a technician is offered worldwide. For more detailed professional services information, visit www.netscout.com/professionalservices.

Ordering information

For more details, please contact NETSCOUT at 1-844-833-3713 (US), 1-978-320-2150 (Outside of US) or go to www.netscout.com.